How To Pair Xfinity Remote With TV Easy Guides 2022

How To Pair Xfinity Remote With TV Easy Guides 2022, How to pair xfinity remote with tv, Losing your TV remote control can be very frustrating. Starting the entire setup process all over again can seem daunting.

Fortunately, the Xfinity remote is different from most remotes. Pairing with your TV is relatively easy thanks to an online remote code lookup tool.

The first time I had to pair the Xfinity remote to my TV, I was worried about the complexity.

I was short on time and wanted to finish the setup process and fix my Xfinity Remote as soon as possible.

So I decided to search online to see if I could find something that would make my job easier.

Fortunately, the official Xfinity website has an online remote code lookup tool.

How do I pair the Xfinity Remote with my TV? Complete the setup with the code you received.

In this article you'll find out how to program your TV's X1, XR11, and XR15 remotes and answer frequently asked questions about Xfinity remotes.

Programming X1 Remote Controls for TV and Audio Using Online Code Lookup Tool

You can program X1 remote controls for both TV and audio devices. To do this, just visit the official Xfinity website and find the Xfinity Remote Code Lookup Tool.

Select your remote control model and press Next to find the unique code for your TV (or audio system). For remotes with a setup button, such as the

XR11, press and hold the setup button until the status LED on the top of the remote turns green.

Once the remote is in setup mode, enter the 4 or 5 digit code you found using the remote code finder tool.

Status LED blinks green twice if setup is successful. However, if the status LED is blinking red, try another code. For remotes without a setup button, like the XR15, while the TV is on, press and hold the Xfinity and Mute buttons at the same time until the status LED at the top of the remote turns green.

When this happens, enter the 4 or 5 digit remote control code you found earlier.

Similar to the XR11, the status LED blinks green twice to indicate a successful setup.

Blinking red indicates that the setup has failed and another code should be tried.

Pair The XR11 Remote To A TV

To pair the XR11 remote to your TV without using the remote code lookup tool, you can follow these steps:

Pairing the XR11 Remote with a TV To pair the XR11 Remote with a TV without using the Remote Code Lookup Tool, follow these steps.

1. Turn on the TV. Change the

2. TV input to the input that is connected to your Xfinity TV box.

3. Press and hold the Setup button until the status LED on the top of the remote control turns green.

4. Press the Xfinity button on the remote control. The Status LED will start blinking green.

5. Enter the 3-digit pairing code displayed on the screen.

6. XR11 Remote is now paired with your TV.

Pairing the XR15 Remote with a TV

To pair the XR15 remote with a TV without using the Remote Code Lookup Tool, follow these steps.

1. Turn on the TV.

2. Change the TV input to the input that is connected to your Xfinity TV box.

3. Press and hold the Xfinity and Info buttons together for about 5 seconds until the status LED on top of the remote turns green.

4. Enter the 3-digit pairing code displayed on the screen.

5. XR15 remote is now paired with your TV.

6. After the remote is successfully paired, follow the on-screen instructions to set the TV's power, volume, and input controls.

Remove TV and Audio Receiver Controls

To remove TV and Audio Receiver Controls:

1. Press and hold the SETUP button on the remote control until the status LED on top of the remote control turns green.

2. Please enter code 9-8-6.

3. The status LED on the top of the

remote will flash green twice to indicate that the remote has been successfully reset.

If that doesn't work, do a full reset of the Xfinity remote.

Pairing the Xfinity Remote with a TV Setting up the Xfinity Remote with the Remote Code Lookup Tool makes the process quick and easy.

Note that there are several remote control codes for different TV manufacturers.

Don't worry if the code doesn't work. You can always try different codes.

If none of the codes work, there may be a problem during setup and the remote will need to be factory reset before re-setup.

Frequently Asked Questions

Where is the setup button on the new Xfinity remotes? The remotes such as the XR11, XR5 and XR2 have a dedicated setup button on the remote's number pad. However, remotes such as the XR15 (X1 or Flex) do not have a setup button.

On these remotes you need to press and hold the Xfinity and Info buttons at the same time until the LED on top of the remote turns green.

What is the Xfinity remote control code? The Xfinity remote control code is a special 4-5 digit code unique to various TV manufacturers.

These codes allow the remote to identify your TV and complete the pairing process.

Codes for popular TV brands include 10178 for LG, 10051 for Panasonic, 10812 for Samsung, 10000 for Sony and 10156 for Toshiba.

Why is the TV not responding to the remote control?

There are many reasons why the TV stopped responding to the remote control.

The most common cause is insufficient power. Simply replace the old battery with a new battery to solve the problem.

Other causes are stuck buttons, static electricity, or a damaged remote control.

Static electricity may be resolved by removing the battery for at least one minute before reinserting it. Here you can read our article about How to Pair Kimfly Step By Step Guides 2022.